Intel Xeon E5-2600 V3

1 message · 6 vues

makh1 » sam. 23 août 2014 19:47 #2957

This month marks the launch of Intel's Xeon E5-2600 v3 processor family, based on the Haswell-EP design. We knew this day was coming, since the company already introduced its Haswell-E-based Core i7s. Of course, the Xeon family is Intel's mainstream server/workstation processor family, and the E5-2600 series is perhaps the highest volume line-up in the Xeon portfolio. It is also responsible for forcing AMD's Opteron 4000 and 6000 CPUs into relative submission. Now, the competition is refocusing efforts on low-end ARM-based processors.

The dual-socket server market is absolutely huge. So, any major technology refresh in the segment triggers billions of dollars in refresh purchases. HP already announced its new ProLiant Generation 9 servers and other vendors will roll out their own implementations starting today. Most server systems have a field life of three to five years. It follows, then, that Haswell-EP-based processors will replace platforms built on Nehalem-EP, Westmere-EP, and Sandy Bridge-EP. And unlike most desktop PCs, every dual-socket server can easily cost many thousand dollars.

As you are undoubtedly aware, there are three distinct lines under the Xeon banner. These E5s represent Intel's mid-range platform. The E3s more closely align with mainstream desktop core configurations, while the E7 tier is higher-end, scaling up to eight processors, many terabytes of system memory, and enabling RAS features for mission-critical applications. The E5 is a utility player of sorts, handling everything from heavily virtualized workloads to bare metal HPC applications. The "2" in the part number lets us know that we're looking at single- and dual-socket-capable parts. The "6" immediately following loses some of its meaning this time around. Previously, Sandy Bridge-EP- and Ivy Bridge-EP-based processors were also available as Xeon E5-2400s, which weren't as fully-featured. There is no Xeon E5-2400 v3 this time around, though. As of now, the E5s are 2600-series chips.

With Sandy Bridge-EP (Xeon E5-2600), we saw as many as eight cores manufactured using a 32 nm process. Ivy Bridge-EP (Xeon E5-2600 v2) benefited from a process shrink to 22 nm, enabling core counts as high as 12. Haswell-EP (Xeon E5-2600 v3) is being productized in configurations as wide as 18 cores. Each generation follows the core design and incorporates much of the technology that we see with the aligned consumer segment. That means, with Haswell-EP, voltage regulation circuitry moves on-package instead of residing on the motherboard. Another major change (already seen on the desktop) is Haswell-EP's LGA 2011-3 interface, which is not compatible with Sandy Bridge-EP, Ivy Bridge-EP, or the new Ivy Bright-EX's 2011-pin socket. The new interface facilitates DDR4 memory compatibility, delivering lower power, more density, and higher data rates than previous generations.

Clearly, the number of SKUs is massive. Intel tells us that three dies are used to create all of these different CPU models. Remember, many of the systems Haswell-EP will replace currently employ Westmere-EP, which allowed up to two sockets with six cores each. Common DDR3 data rates were 1066 and 1333 MT/s. Updating to Xeon E5-2600 v2 makes it possible to put two to three times as many cores into the same form factor and likely reduce power consumption at the same time.

Spanning four to 18 cores and up to 3.6 GHz base clock rates, Intel is enabling CPU models that are optimized for many different markets. Thermal design power ratings range from 55 to 145 W on the server side, and as high as 160 W for the Xeon E5-2687W v3 workstation part. That includes the fully integrated voltage regulator (FIVR) also seen on Intel's desktop-class Haswell processors.

There are a number of evolutionary changes to account for, but perhaps the biggest is Grantley's memory support. Four generations of server platforms dating back to Nehalem-EP utilized DDR3 RAM, and we've seen efforts to further tweak that standard for lower power use or greater density. Registered DDR4 DIMMs successfully achieve those improvements, additionally increasing throughput per channel.

Of course, memory support is a product of the CPU's integrated memory controller. But not all system functions are built into Intel's processors yet. You still need a platform controller hub for a lot of the peripheral connectivity and I/O. The Wellsburg PCH, much like the X99 Express, exposes 10 SATA 6Gb/s ports. That's a significant upgrade to the Xeon E5-2600 v1 and v2 platform, where the focus was on adding optional SAS connectivity. Intel is clearly taking a different tact to coincide with the introduction of its NVMe-based SSDs. We're plenty happy with expanded SATA support, which is great for low-cost SSDs and traditional mechanical disks. High-performance storage is moving to the PCIe bus.

Other features include six USB 3.0 ports and eight second-gen USB connectors, useful for faster KVM cart access and accelerated boot from an internal VMware ESXi USB key installation. Several of the platforms we've seen in the lab are USB 3.0-only, in fact. That's a significant change from previous generations limited to USB 2.0.

The CPUs still enable 40 PCI Express 3.0 lanes, divisible into a number of different link configurations. This is a common feature on processors in the -EP range. With faster networking in this generation and a renewed focus on PCIe-based flash storage, all of that connectivity should go to good use.

Alongside the Grantley platform, Intel is introducing a new generation of Ethernet network adapters code-named Fortville. The controller is 40 Gb-capable, and it completely changes the game with regards to Intel's networking capabilities.

The other side of the Fortville story, aside from the controller's huge performance and density improvements, is power consumption. Fortville uses less power than the previous-gen X520 10 GbE adapters, both at idle and under load. The X520s had an 8.6 W TDP, while the XL710 generation is rated at 7 W. In a theoretical efficiency metric, Fortville delivers more than 3.5 times the throughput/watt compared to previous generation. That is a massive leap forward. Consistent with this, Fortville is rated at 3.6 W typical power consumption using two 40 GbE links, so 7 W TDP represents a lot of headroom.

At the end of the day, Intel's Fortville-based adapters should enable more bandwidth, lower latency, and higher port density, all at reduced power consumption.

Haswell on the desktop is not a big deal. But Haswell-EP is a completely different story. Intel uses its advanced manufacturing to enable more cores, more cache, and a redesigned memory controller able to support DDR4. All of that comes together to yield a big step up compared to Ivy Bridge-EP. When you consider that these CPUs replace parts in servers with four to eight cores, the potential gains are substantial. Delivering twice the performance in a similar form factor makes it easy for any business to at least consider consolidating their hardware infrastructure.

When it comes to power consumption, we already know that Haswell was designed to service the mobile space. This has some favorable implications in the server world too. Of course, the difference is that Haswell-EP-based CPUs are much larger (and multiplied in a dual-socket configuration), so all gains are amplified.

In terms of performance per core, unless your software is optimized to exploit AVX 2.0, Haswell's biggest benefits come from the architecture's inherent IPC tweaks. Where Haswell-EP really shines is its higher core counts that help scale performance accordingly in well-parallelized workloads.

DDR4 memory support is perhaps the most next-generation aspect of Intel's new Xeon E5-2600 v3 processors. In time, we will likely see higher data rates, increased density, and potentially lower-power versions of the standard. Unlike DDR3, DDR4 is still supply-constrained, so new servers are going to be priced higher until memory vendors catch up. Right now, the market is split. Most consumer devices are tied to DDR3; Haswell-E/EP is the first design pushing DDR4. That'll change slowly. But for now, there are quantifiable power and performance benefits to justify the eventual adoption of a what currently appears to be a ridiculously expensive technology.

Reflecting on the press day that Intel hosted to introduce Haswell-EP, higher core counts, DDR4, and advanced ISA support were the most obvious platform changes. But the doors opened by a low-power controller capable of two 40 GbE interfaces or eight 10 Gb links cannot be ignored.

Intel is clearly driving towards a software-defined vision and takes a major step toward that goal with its Xeon E5-2600 v3 introduction. The way Intel presents its strategy addresses a more complete datacenter solution. Much like HP, Intel no longer pitches the Xeon as a new, faster processor on its own (even if it is). Instead, the company has a holistic goal for driving compute, storage, and networking performance over the next few years. Haswell-EP is the showcase for that.

source: tomshardware.com
Membre
Messages : 226
Inscription : 27 mars 2013